Desktop 50W Co2 Laser Engrave and Cutter Machine 20'' x 12'' CW-3000 Chiller

Desktop 50W Co2 Laser Engrave and Cutter Machine 20'' x 12'' CW-3000 Chiller
Desktop 50W Co2 Laser Engrave and Cutter Machine 20'' x 12'' CW-3000 Chiller
Desktop 50W Co2 Laser Engrave and Cutter Machine 20'' x 12'' CW-3000 Chiller
Desktop 50W Co2 Laser Engrave and Cutter Machine 20'' x 12'' CW-3000 Chiller
Desktop 50W Co2 Laser Engrave and Cutter Machine 20'' x 12'' CW-3000 Chiller

Desktop 50W Co2 Laser Engrave and Cutter Machine 20'' x 12'' CW-3000 Chiller

Laser Engraver and Cutting Machine 500mm 300mm. Control system : 32 BIT DSP. Working size (XY): 20x 12(500mm x 300mm). Up and down work plate (Z): 160mm. Laser tube type : Co2 Glass sealed laser tube.

Driver type : Micro Stepping Motor. PC Interface : USB2.0 and USB Disk. Image form : HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AI. Package : Standard Wooden case for export.

Laser Engraving software Package (English Version). Air exhaust fan(Installed on machine). Communication cable and USB cable.

3 Reflect optics (installed in the machine). 1 Focus optics (installed in the machine). Red-dot Positioning Function(showing outline or laser dot position). Rotary(for engraving cylinder materials). We provide free service for the machine all the life.

Q: Do I need two laser machines to engrave and cut separately? A: No, the laser machines we provide are capable of both engraving and cutting.

One machine can fulfill the two purposes. Q: Do the laser machines need to be connected to a laptop or desktop computer to work?

A: Yes, either is ok. It supports Windows 10, Windows 2000, Windows XP, Win 7, and other operating systems. Q: What kind of graphic format does it support?

A: JPG, PNG, BMP, PLT, DST, DXF, CDR, AI, DSB, GIF, MNG, TIF, TGA, PCX, JP2, JPC, PGX, RAS, PNM, SKA, RAW. Q: How to distinguish laser tubes with different powers and applications?

Laser tube length (relatively speaking, the longer, the bigger). Laser tube diameter (relatively speaking, the thicker, the bigger). The bigger a laser tube power is, the deeper the machine can cut, but its light spot is bigger.

So, it is better to use a machine with a low-power laser tube to engrave, such as 40W, 50W or 60W. Q: Is it better to increase blow to improve laser processing performance?

A: For some thick materials, it works. But, when carving some other materials, you need to blow less.

Q: How long will it take to learn to operate a laser machine? A: If you are able to use some basic graphic design software, it will only take a few hours to master the operation. You just need to do some simple tests on different processing materials to know how to set the correct speed and laser power. Q: Is a laser machine in operation harmful to our bodies? A: It is not harmful as long as the laser is not exposed directly to skin and eyes. The item "Desktop 50W Co2 Laser Engrave and Cutter Machine 20'' x 12'' CW-3000 Chiller" is in sale since Sunday, November 1, 2020. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "bestlasershop" and is located in CN.

This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.


Desktop 50W Co2 Laser Engrave and Cutter Machine 20'' x 12'' CW-3000 Chiller