This laser cutter provides you with a wider workbed of 20 × 28 inches, and the 4 pass-through doors design makes the laser cutter can accommodate super larger items need to be engraved. The transparent machine cover help you to monitor the engraving progess at any time, when an emergency occurs, press the emergency button or open the machine cover both can automatically cut off the power supply.60W CO2 laser engraver adopts upgrade 6442 RUIDA system, RDworks & CorelLaser software are included (also compatible with third party software Lightburn & AutoCAD, NOT INCLUDE), features 20 × 28 inches large size workbeds, high performance 60W laser tube, 4 pass-through doors, honeycomb & aluminum blade dual platforms, auto lift by pressing a button, make it a laser engraver of great functionality. The autofocus pen senses the correct focus distance from the laser head to the target material and signals the Z-axis motor to automatically raise or lower the workbed to the perfect focus height. A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machine's path, and identifies positioning sizes, allowing an effortless project setup process.
After the upgrade, the more sophisticated 6442 system can perform autofocus and complete more complex engraving graphics. At the same time, it also has password & key protection to prevent unauthorized use. These features greatly improve the safety performance of the machine. RDworks & CorelLaser are inluded in the package (Compatible with third party software Lightburn & AutoCAD, NOT INCLUDE).A transparent acrylic glass viewing window allows observation throughout the laser engraving process. Plus, it's equipped with a sepia tint to protect your eyes from indirect laser beam exposure.
A pre-installed vent fan expels smoke and fumes to create a safer workspace and extend the service life of your machine. Pre-installed hoses along with the included water pump allow for a fast and easy setup.
Only use with distilled water, ensuring it stays between 60-70°F (16-21°C). Laser engraver with LCD digital display makes you easily monitor the laser tube temperature and adjust the machine's power suits the thickness of the engrave item. There also include a Emergency Shutdown Button can immediately cut-down the power when urgency happen. 4 pass-through doors make the machine can hold the engraving material lager than the machine itself from any direction.
Quality power source can provide the laser tube with continuous power, this it will provide. The cover of this machine is transparent. You can monitor the engraving progress of the project at any time.Once an emergency occurs, the laser working can be cut off immediately by the emergency button or by opening the cover. In addition, the transparent part of the cover has an eye protection coating. Protect your eyesight to a great extent.
Honeycomb and Blade Operate Platforms. This CO2 laser engraver includes 2 workbeds include the honeycomb platform and blade platform, they are suitable for engraving materials of different hardness, the honeycomb platform suits both hard and soft material and the blade platform suits hard material. The workbed can be automatically lift by the panel, thus the engraving progress can be more efficient.The included compatible 60w laser tube can cut deeper and engrave thicker material, it will help you complete lots of designs in the future. The display keeps you monitor the machine's working situation, the emergency stop button can immediately cut the laser working, also you can stop the engraving by opening its cover when occurs happen, then close the cover and press start to resume your work. Compatible with the high ventilation performance, the debris born from the engraving progress can be easily blown into the large capacity wast collection bin inside the machine, which make you enjoy a easy cleaning. You just need to put the project on the workbed, then the machine can finish focus, you do not need to spend a long. LaserCutting:Acrylic, Wood, Leather, Plastics, Fabrics, MDF, Cardboard, Paper, Corian, Foam, Fiberglass, Rubber. Marking/Engraving:Acrylic, Wood, Leather, Plastics, Fabrics, Glass, Rubber, Cork, Brick, Granite, Marble, Tile, River Rock, Bone, Melamine, Phenolic, Aluminum, Stainless Steel, Titanium. Cannot cut hardwoods like mahogany. CO2 laser machines only mark bare metals when anodized or treated.
Some PVC-based acrylics can create toxic fumes when lasered. Tape for Laser Mirror Adjustment. 7 mm Acrylic Focus Tool. 4G USB Flash Drive (software). If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We always aim to put our customers first. We excel at providing fast updated products to our customers and aim to provide the best service via our dedicated customer service, product and dispatch teams. Our team works tirelessly to ensure our consumers come first and this can be seen via our excellent track record.
If you do encounter problems we are always on hand and happy to help just drop us a message. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving".
The seller is "worldwide_aa" and is located in this country: US. This item can be shipped to United States.