Die Size: 7.5 cm (3 inch). Button Size: 7.5 cm (3 inch). Base Size: 16 x 29 cm (6.3 x 11.4 inch). Handle Length: 30 cm (11.81 inch).1 x Set of Dies 75 mm. 100 x 75 mm Buttons (metal parts + plastic parts + clear covers). Q: Cannot make the button well, and the top and bottom do not match. A: Check the size of the up iron piece and back cover, make sure the up iron piece is a little bigger than the back cover. Q: How to press the two molds when you make a button?
A: When press mold A, you need to keep a distance, don't let the upper column through the hole, but when press mold B, please let the column through the hole until it completely closed. Q: What things need to attention when you install the mold of the machine? A: When you install the mold, the pin of the two sides must be installed, and when you installed the two sides must be pushed to the end, so that the upper and lower molds can be aligned.Q: How to solve the shell not fully crimping around the back? A: When you press B mold, you must press slowly and hard until it to the end, and pauses two more seconds, then the buttons will be made very well. If the pressure is lighter, or lightly pressed, the mold will rebound quickly when it is closed, and it will easily fall off. We will always strive to solve any issues you may have.
The text descriptions can be different Font Size, Font Color, Style and even graphics and icons are also accepted. This item is in the category "Crafts\Multi-Purpose Craft Supplies\Crafting Tools\Badge/ Button Makers".The seller is "maixingsm" and is located in this country: US. This item can be shipped to United States.