Monport Upgraded Fireproof 60W 16" x 24" Manual Focus CO2 Laser Engraver Cutter. Upgraded 60W CO2 Laser Engraver Cutter with 16 x 24 Inch Work Table, Laser Engraving Cutter Machine with Ruida Digital Controller, LightBurn Software for Windows, Mac OS, Linux. Working Dimension: 16" x 24" (40 cm x 60 cm). Package Dimension: 48.8" x 33" x 32.6 (124cm x 84 cm x 83 cm).9" Standard Z-depth and 10" Max Z-depth. Net Weight: 209 lbs (95 kg). Package Weight: 253.5 lbs (115 kg). This viewing window is made from special fire-resistant polyester with iron frames. The melting point of this polyester ranges from 432° to 488° and the ignition temperature of it is over 1000°, which can dramatically decrease the possibility of fire accidents caused by the heat of laser burning the materials. Whether your chosen software is LightBurn, RDworks, AutoCAD, or CorelDRAW, this Ruida digital controller can support the given platform. The Ruida Controller with a digital display can control the laser head, start or stop projects, adjust laser power and speed settings and so on.
The red dot shows the laser head position, marks the working path and frames the project sizes, assisting you with more convenience and guidance. The safety shutdown sensor helps stopping the machine even if the window cover is on.
Once closed, press the "Enter" button to continue operation. The wide 16'×24' (400×600 mm) engraving table includes both honeycomb and aluminum knife beds to handle a wide variety of nonmetallic substrates, including wood, leather, fabric, stone, paper, and much more! Use LightBurn's complete set of artistic tools to create intricate patterns and stunning images that are easy to upload to your laser engraver.
Equipped with X and Y stepper motors, this rail features efficient power transmission with high precision. The enclosed rail is designed to avoid smoke and debris and prolong the service time of rail units.
The Engraving Speed is up to 800 mm/s; The Cutting Speed is up to 400 mm/s; The Resolution is up to 4500 dpi; 2.0 Focal distance provides high resolution and etching of tiny fonts. A built-in air assist system guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping engravings more precise. 3-ways to Connect with PC End. Two USB ports provide options including flash drive connectivity and a USB-to-USB PC connection.
In addition, one ethernet port is also available for connection. Works on Windows XP, 2000, Vista, WIN 7, 8, 10 & 11, both 64 & 32 bit. MacOS (Version 10.11 and higher) ONLY with LightBurn software. Compatible with Lightburn, RDWorks, Coreldraw, Auto-CAD. Supported image formats: BMP, HPGL, GIF, JPG, JPEG, DXF, DST, AI and others.Custom CO2 glass laser tube capable of continuous operation at 10,640 nm. Rated at over 60 watt.
18mm Focal lens diameter & 2 Focal distance. Recommended engraving speed: 100 - 500mm/s. Recommended cutting speed: 1 - 30mm/s (actual speed depends on the thickness of the material). The light belt under the lid gives point illumination for precise. Linear System - Custom extruded aluminum linear rails.
Motion - Equipped with stepper X, Y axis, plus mechanical limit switches. Cooling - easy-to-setup water pump and hoses. Air Assist - Internal air assist with no external compress or required. Ventilation - On-board exhaust fan, as well as an exhaust hose so you can vent the fumes to the outdoors. Standard 110V, AC power connection.4-pinport connection for rotary axis devices. Recommended Operating Temperature: 60 -104 °F (16 °C-40 °C). Attention: the CO2 water temperature must be maintained at 60-70 °F (16-21°C).
60W CO2 laser tube with an estimated lifetime of up to 2,000 operation hours depending on power setting usage and water cooling performance. Attention: Frequent use of high laser power settings will shorten the laser tube lifetime as follows.Low Power 10-40% = 1,700-2,000 Hours Moderate Power 40-70% = 1,300-1,500 Hours High Power 70-100% = 800-1,000 Hours. Can safely engrave or cut any laser-compatible material.
Wood, glass, acrylic, fabric, leather, paper, cardboard, rubber. If necessary, we can test it for you. Ethernet to Ethernet Cable 1. USB Type-A to Type-A Cable 1.
Venting Exhaust Duct 4 ft. USB Drive with Software 1.
On all 60W laser machines and parts. FDA Approval & CE Certified. Download the Manual: 60W CO2 User Manual. Download the Settings: CO2 Parameter Settings. Simply return the item to us in 30 days in an unused condition.
But remember to keep the item clean, intact with all labels, or we won't accept your request. As an emerging leader in manufacturing and exporting, we specialize in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for over 5 years. It is our mission to provide innovative products and competitive prices to satisfy you. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "yx_store" and is located in this country: US.
This item can be shipped to United States.